Deutsch
Deutschland
Anmelden
Tipp von eurobuch.com
Ähnliche Bücher
Weitere, andere Bücher, die diesem Buch sehr ähnlich sein könnten:
Buch verkaufen
Anbieter, die das Buch mit der ISBN 9783639286298 ankaufen:
Suchtools
Buchtipps
Aktuelles
FILTER
- 0 Ergebnisse
Kleinster Preis: 44,59 €, größter Preis: 49,00 €, Mittelwert: 48,12 €
Cylindrical and Spherical problem in Mechanical engineering: elastic-plastic and creep stresses - Dr Pankaj
Vergriffenes Buch, derzeit bei uns nicht verfügbar.
(*)
Dr Pankaj:
Cylindrical and Spherical problem in Mechanical engineering: elastic-plastic and creep stresses - Taschenbuch

ISBN: 3639286294

Taschenbuch, [EAN: 9783639286298], VDM Verlag Dr. Müller, VDM Verlag Dr. Müller, Book, [PU: VDM Verlag Dr. Müller], VDM Verlag Dr. Müller, Cylindrical and Spherical problem in Mechanical engineering has been discuss by using Seth's B.R. Theory.For the problems in Elastic - plastic transition stresses in a transversely isotropic thick-walled cylinder subjected to internal pressure and steady state temperature, it has been observed that at room temperature, thick-walled cylinder made of isotropic material yields at a high pressure at the internal surface as compared to cylinder made of transversely isotropic material. With the introduction of thermal effects isotropic/transversely isotropic cylinder yields at a lower pressure whereas cylinder made of isotropic material requires less percentage increase in pressure to become fully-plastic from its initial yielding as compared to cylinder made of transversely isotropic material.And for the Problems Elastic - Plastic Transition Stresses in a Spherical Shell under internal Pressure by using concept of Lebesgue measure, it has been seen that the result are same as given by Mellor, Hill and Seth's., 60448011, Ingenieurwesen & Technik, 60603011, Atomenergie, 60458011, Bauwesen, 60575011, Bioengineering, 60449011, Chemie für Ingenieure, 60508011, Computertechnik für Ingenieure, 60625011, Design für Ingenieure, 60516011, Elektrotechnik, 60628011, Energie, 60571011, Fahrzeugtechnik, 60652011, Forschung, 60543011, Industrie, Herstellung & Abläufe, 60565011, Luft- & Raumfahrt, 60636011, Management, 108498011, Marine, 60637011, Materialien, 60556011, Materialwissenschaft, 60580011, Mechanik, 60610011, Nachschlagewerke, 1320252031, Patente & Erfindungen, 60604011, Petroleum, Bergbau & Erde, 60651011, Stromanalagen, 60618011, Telekommunikation, 60447011, Architektur, Technik & Ingenieurswesen, 54071011, Genres, 52044011, Fremdsprachige Bücher, 56441011, Technologie, 56447011, Erneuerbare Energien, 56448011, Innovationen, 1320311031, Nachschlagewerke, 56444011, Nanotechnologie, 56449011, Philosophie der Technologie, 56445011, Risiken, 56446011, Sicherheit & Gesundheit, 273011011, Soziale Aspekte, 54518011, Technisches Denken & Schreiben, 56451011, Technologie & Gesellschaft, 56211011, Technologiegeschichte, 56442011, Zukunftsforschung, 56047011, Fachbücher, 54071011, Genres, 52044011, Fremdsprachige Bücher

Neues Buch Amazon.de (Intern...
Amazon.de
Neuware Versandkosten:Versandkostenfrei innerhalb EU, Schweiz und Liechtenstein (soferne Lieferung möglich) (EUR 0.00)
Details...
(*) Derzeit vergriffen bedeutet, dass dieser Titel momentan auf keiner der angeschlossenen Plattform verfügbar ist.
Cylindrical and Spherical problem in Mechanical engineering - Dr Pankaj
Vergriffenes Buch, derzeit bei uns nicht verfügbar.
(*)
Dr Pankaj:
Cylindrical and Spherical problem in Mechanical engineering - neues Buch

ISBN: 9783639286298

ID: ead5585d72a314d61484f3849b12e4b4

Cylindrical and Spherical problem in Mechanical engineering has been discuss by using Seth's B.R. Theory.For the problems in Elasticplastic transition stresses in a transversely isotropic thick-walled cylinder subjected to internal pressure and steady state temperature, it has been observed that at room temperature, thick-walled cylinder made of isotropic material yields at a high pressure at the internal surface as compared to cylinder made of transversely isotropic material. With the introduction of thermal effects isotropic/transversely isotropic cylinder yields at a lower pressure whereas cylinder made of isotropic material requires less percentage increase in pressure to become fully-plastic from its initial yielding as compared to cylinder made of transversely isotropic material.And for the Problems ElasticPlastic Transition Stresses in a Spherical Shell under internal Pressure by using concept of Lebesgue measure, it has been seen that the result are same as given by Mellor, Hill and Seth's. Bücher / Naturwissenschaften, Medizin, Informatik & Technik / Technik / Maschinenbau, [PU: VDM Verlag Dr. Müller, Saarbrücken]

Neues Buch Dodax.de
Nr. 57c9a1e99563510946d6c4db Versandkosten:Versandkosten: 0.0 EUR, Lieferzeit: 7 Tage, DE. (EUR 0.00)
Details...
(*) Derzeit vergriffen bedeutet, dass dieser Titel momentan auf keiner der angeschlossenen Plattform verfügbar ist.
Cylindrical and Spherical problem in Mechanical engineering - Dr Pankaj
Vergriffenes Buch, derzeit bei uns nicht verfügbar.
(*)
Dr Pankaj:
Cylindrical and Spherical problem in Mechanical engineering - Taschenbuch

2010, ISBN: 3639286294

ID: 9612496119

[EAN: 9783639286298], Neubuch, [PU: Vdm Verlag Aug 2010], This item is printed on demand - Print on Demand Titel. - Cylindrical and Spherical problem in Mechanical engineering has been discuss by using Seth's B.R. Theory.For the problems in Elastic - plastic transition stresses in a transversely isotropic thick-walled cylinder subjected to internal pressure and steady state temperature, it has been observed that at room temperature, thick-walled cylinder made of isotropic material yields at a high pressure at the internal surface as compared to cylinder made of transversely isotropic material. With the introduction of thermal effects isotropic/transversely isotropic cylinder yields at a lower pressure whereas cylinder made of isotropic material requires less percentage increase in pressure to become fully-plastic from its initial yielding as compared to cylinder made of transversely isotropic material.And for the Problems Elastic - Plastic Transition Stresses in a Spherical Shell under internal Pressure by using concept of Lebesgue measure, it has been seen that the result are same as given by Mellor, Hill and Seth's. 56 pp. Englisch

Neues Buch Abebooks.de
AHA-BUCH GmbH, Einbeck, NDS, Germany [51283250] [Rating: 5 (von 5)]
NEW BOOK Versandkosten:Versandkostenfrei (EUR 0.00)
Details...
(*) Derzeit vergriffen bedeutet, dass dieser Titel momentan auf keiner der angeschlossenen Plattform verfügbar ist.
Cylindrical and Spherical problem in Mechanical engineering - Pankaj, Dr
Vergriffenes Buch, derzeit bei uns nicht verfügbar.
(*)
Pankaj, Dr:
Cylindrical and Spherical problem in Mechanical engineering - Taschenbuch

2010, ISBN: 3639286294

Gebundene Ausgabe, ID: 8822163

elastic-plastic and creep stresses - Buch, gebundene Ausgabe, 56 S., Beilagen: Paperback, Erschienen: 2010 VDM Verlag, [PU: VDM Verlag Dr. Müller, Saarbrücken]

Neues Buch Buch24.de
buch24de
Versandkosten:zzgl. Versandkosten
Details...
(*) Derzeit vergriffen bedeutet, dass dieser Titel momentan auf keiner der angeschlossenen Plattform verfügbar ist.
Pankaj, Dr: Cylindrical and Spherical problem in Mechanical engineering
Vergriffenes Buch, derzeit bei uns nicht verfügbar.
(*)
Pankaj, Dr: Cylindrical and Spherical problem in Mechanical engineering - neues Buch

ISBN: 9783639286298

ID: 430832016

elastic-plastic and creep stresses elastic-plastic and creep stresses Bücher > Wissenschaft > Technik, [PU: VDM Verlag Dr. Müller, Saarbrücken]

Neues Buch eBook.de
No. 12546284 Versandkosten:zzgl., Versandkosten, DE (EUR 0.00)
Details...
(*) Derzeit vergriffen bedeutet, dass dieser Titel momentan auf keiner der angeschlossenen Plattform verfügbar ist.

Details zum Buch
Cylindrical and Spherical problem in Mechanical engineering

Cylindrical and Spherical problem in Mechanical engineering has been discuss by using Seth's B.R. Theory.For the problems in Elastic - plastic transition stresses in a transversely isotropic thick-walled cylinder subjected to internal pressure and steady state temperature, it has been observed that at room temperature, thick-walled cylinder made of isotropic material yields at a high pressure at the internal surface as compared to cylinder made of transversely isotropic material. With the introduction of thermal effects isotropic/transversely isotropic cylinder yields at a lower pressure whereas cylinder made of isotropic material requires less percentage increase in pressure to become fully-plastic from its initial yielding as compared to cylinder made of transversely isotropic material.And for the Problems Elastic - Plastic Transition Stresses in a Spherical Shell under internal Pressure by using concept of Lebesgue measure, it has been seen that the result are same as given by Mellor, Hill and Seth's.

Detailangaben zum Buch - Cylindrical and Spherical problem in Mechanical engineering


EAN (ISBN-13): 9783639286298
ISBN (ISBN-10): 3639286294
Gebundene Ausgabe
Taschenbuch
Erscheinungsjahr: 2010
Herausgeber: VDM Verlag Dr. Müller

Buch in der Datenbank seit 02.02.2009 06:57:04
Buch zuletzt gefunden am 29.05.2017 18:32:16
ISBN/EAN: 9783639286298

ISBN - alternative Schreibweisen:
3-639-28629-4, 978-3-639-28629-8


< zum Archiv...
Benachbarte Bücher